What is traditional sand sieving method?Why choose sand screening machine?

What is traditional sand sieving method?

The traditional sand screening method only relies on a circular or inclined square screen, and uses manpower to complete the sand screening. The structure is simple and the efficiency is extremely low. As shown in the picture.

Why choose sieving machine?

The traditional sand screening method only relies on one person and one screen to screen a large amount of sand and gravel, and the efficiency and output are very low. Assuming that physical strength is not consumed due to the increase in time, the output of manual sand screening in one hour is only About 1 ton. The processing capacity of the Silica Sand Sieve Machine can reach 3 tons, and the output of special models can be higher. And after removing the purchase cost of the machine, there is no need to invest in additional labor costs.

The traditional sand sieving method can only remove relatively large stones, and cannot finely screen and separate the sand and stones. However, the Silica Sand Sieve Machine can complete the removal of large stones, and the multi-layer screen design can complete 2 at the same time. Sand and gravel treatment between -500 mesh is more efficient and convenient.

In addition, the traditional artificial sand screening method is carried out in an open environment, which will generate a lot of dust, which will not only endanger the health of workers, but also cause environmental pollution. The machine processing of sand and gravel can ensure that it is completed in a sealed environment, which greatly reduces the possibility of dust and does not endanger human health.